Quick Mount PV QBase™ Standard Flat Tile Mount — Treepublic

Quick Mount PV QBase™ Standard Flat Tile Mount

by Quick Mount PV
$ 29.10
  • Complete Flat Tile Mount Kit

    Suitable for use with all leading PV racks, the Quick Mount PV QBase™ Standard Flat Tile Mount is the most universally code-compliant mount on the market for installing solar arrays on new composition flat tile roofs, whether for new construction or roof replacement. The mount has a short post to allow attachment of low-profile solar panel arrays to flat tile. (The QBase Standard Flat Tile Mount is identical to the QBase Universal Tile Mount, except with a shorter post.)

    • Strongest off-the-shelf mechanical mount
    • All exposed hardware is 18-8 stainless steel
    • Flashed at both the deck and top level
    • Attaches to roof structure with 2 or 4 fasteners
    • Meets or exceeds tile roofing best practices

    Built to Stand Strong for Decades

    The QBase Standard Flat Tile Mount is a complete double-flashed mounting kit for both new roof and retrofit installations. Backed by a 20-year warranty, it features a strengthened cast aluminum foundation with four gussets that reinforce standoff posts for tile sizes ranging from 4.5 to 7 inches. Each flashing has a spun aluminum cone, and seamless design helps prevent failure in rough environmental conditions. The mount also has subflashing at the roof deck, which creates a waterproof shield to protect all penetrating fasteners from water leakage.

    Works with All Leading PV Racks

    Compatible racks include, but are not limited to the following brands: AET, Conergy SunTop, Creotecc, DPW Power Rail, Haticon, IronRidge, IWM Flushmount, LevelOne, ProSolar, Schletter, SnapNrack, SolarWorld Sunfix plus, Unirac, Unistrut, and Zep Solar.

    Kit Includes:

    • Cast Aluminum QBase
    • Aluminum Post, 1-1/4" x 4-1/2"
    • Spun Aluminum Cone Subflashing, 9" x 9"
    • Spun Aluminum Cone Malleable Flashing, 18" x 18"
    • (2) Zinc-coated Steel Lag Bolts, 5/16" x 3"
    • Stainless Steel Machine Bolt, 5/16" x 1"
    • EPDM Post Collar/Counter Flash
    • EPDM-bonded Stainless Steel Sealing Washer, 5/16" x 1-1/4"
    • Stainless Steel Fender Washer
    • Stainless Steel Split Lock Washer, 5/16"
    • Grade-8 Machine Bolt, 5/16" x 3/4"

    NOTE: Quick Mount PV products are NOT to be used to anchor fall protection equipment.


    • Model Number: QMSFT
    • Manufacturer: Quick Mount PV
    • Dimensions:
      • 004510: 1.25(H) x 12(W) x 12(D) inches
      • 004515: 3.75(H) x 12(W) x 12(D) inches
    • Weight:
      • 004510: 1.125 pounds
      • 004515: 1.375 pounds
    • Warranty: 20-year warranty; 50-year expected life


    Click here to download the installation guide!

    Click here to download warranty information!


You recently viewed

Clear recently viewed